Fire alarms and sprinklers protect a building around the clock. When those systems are shut down for repairs, impaired after damage, or not yet installed on a construction site, the building loses its early warning. A fire watch in BC fills that gap: trained people walk the property, look for fire and raise the alarm until the systems are working again. This guide explains when a fire watch is required, who decides, and what proper coverage looks like.
What Is a Fire Watch?
A fire watch is a temporary safety measure in which one or more dedicated people patrol a building or site to watch for fire, smoke and fire hazards, alert occupants and call the fire department if needed. Fire watch guards do not replace the fire protection system — they cover the period while it is out of service.

When Is a Fire Watch Required in BC?
Fire codes in BC require that protection is maintained when part of a fire protection system is shut down. The City of Vancouver’s Fire By-law, for example, states that “when any portion of a fire protection system is temporarily shut down, alternative measures shall be taken to ensure that protection is maintained” (Division B, Article 6.1.1.4). A fire watch is the most common of those alternative measures.
In practice, this kind of coverage is usually needed when:
- A sprinkler system is impaired, drained or under repair
- A fire alarm system is offline or not monitoring properly
- Planned maintenance or upgrades take fire protection equipment out of service
- A building has been damaged by fire, flood or impact
- A construction or renovation site does not yet have working fire protection
- Hot work such as welding or cutting creates an elevated fire risk
- The fire department or the building’s insurer orders one
Who Decides — and What They May Require
The local fire department sets the rules for its municipality and can order one. Requirements vary between municipalities, so always confirm the details with your fire department and your building’s fire safety plan. As an example of what can be required, the City of Vancouver’s fire watch order calls for:
- A 24-hour fire watch until the fire protection system is fully back in service
- Coverage of all areas of the building, and notification of occupants who are unprotected
- Notifying the company that monitors the fire alarm when the system goes out of service and when it is restored
- Notifying the fire department if a system is out of service for more than four continuous hours in a 24-hour period
Your insurer may have its own conditions, such as written logs, so check your policy before work begins.

Fire Watch on Construction Sites and Vacant Buildings
Construction sites carry more fire risk than finished buildings: combustible materials, temporary electrical work, hot work and systems that are not yet commissioned. Many BC fire departments require a construction fire safety plan, and dedicated fire patrols are often part of it during high-risk phases or after hours.
Vacant and unoccupied buildings are also vulnerable. Without occupants, a small fire can grow unnoticed, and empty properties attract trespassers. This coverage combined with patrol security protects against both.
What Fire Watch Guards Do on Site
- Patrol every area on the schedule set by the fire department or the fire safety plan
- Look for smoke, heat, sparks, damaged wiring and other ignition sources
- Keep exits, stairwells and fire department access routes clear
- Make sure fire extinguishers are available and unobstructed
- Know how to raise the alarm and call 911, and how to help occupants evacuate
- Record every patrol — times, areas checked, hazards found and action taken — in a written log
Detailed logs matter: they show the fire department and your insurer that protection was maintained throughout the impairment.

Planning a Fire Watch Before a Shutdown
- Confirm the requirements with your fire department and review your fire safety plan.
- Notify your fire alarm monitoring company and, where required, the fire department.
- Book guards for the full impairment period, including nights and weekends.
- Brief the guards on the building, the fire safety plan and the location of the fire safety plan box — see our guide to the fire safety plan box.
- Keep the coverage in place until the system is fully restored and tested.
Fire Watch Log: What a Good Record Includes
A fire watch is only as good as its records. Each round should be logged with:
- The date and the start and end time of the round
- The areas and floors checked
- Any hazards found — blocked exits, damaged wiring, stored combustibles, signs of smoke
- The action taken and who was notified
- The name of the guard on duty
Keep the log on site until the fire protection system is restored, then file it with the building records. Fire departments and insurers may ask to see it.
Fire Watch vs. Regular Security Patrols
| Fire watch | Regular security patrol | |
|---|---|---|
| Main focus | Fire, smoke and fire hazards | Security, trespassing, theft and safety |
| When used | While fire protection systems are impaired or not yet installed | Ongoing, on a set schedule |
| Who sets the rules | Fire department, fire safety plan, insurer | Property owner and security provider |
| Records | Detailed fire watch log for every round | Patrol log and incident reports |
A fire watch guard should not be pulled away for unrelated security duties. If a property needs both, plan separate coverage for each.
How to Prepare a Building for a Fire Watch
- Give the guard keys or access to every area they must check.
- Provide floor plans and point out the fire alarm panel, extinguishers and exits.
- Share emergency contacts for the owner, property manager and contractor.
- Tell occupants that extra fire patrols are in place and what to do if they see a problem.
- Agree on how the coverage will end — usually after the system is restored and tested.
Fire Watch Costs: What Drives the Price
Fire watch is usually billed per guard, per hour. The total depends on how long the impairment lasts, the size of the building or site, how many guards are needed to cover every area on schedule, and whether coverage falls on nights, weekends or holidays. Booking guards before a planned shutdown is almost always faster and simpler than arranging emergency coverage after a system fails.
Frequently Asked Questions
When is a fire watch required in BC?
Generally whenever part of a building’s fire protection system is shut down or impaired, when a construction site lacks working fire protection, or when the fire department or your insurer orders one. Exact rules depend on your municipality.
How long does a fire watch last?
Until the fire protection system is fully back in service. In Vancouver, for example, the fire watch order calls for a 24-hour watch until the system is restored.
Do fire watch guards need to be licensed?
Guards provided by a security company in BC must hold a BC security worker licence. Trans World Security Services Ltd. only deploys licensed guards.
Who pays for a fire watch?
The building owner or the party responsible for the impairment — often the owner, property manager or general contractor.
Need fire watch coverage today? Trans World Security Services Ltd. provides licensed fire watch security across Metro Vancouver, the Fraser Valley and Vancouver Island. Request a free quote or call 778 855 3065.



